Indesit W133s leaks

scottc1978 · 21 Sep 2005

Leaking quite a lot of water, seems to be coming from a screw head & rubber washer located below the drum, found the screw was loose then retightened and was okay for a few washes then leaked again. Screw & washer can be found by tipping the washer away from you and looking under the drum.

Can anyone please advise if this is the right diagnosis.

Thanks.

keithwasherman · 21 Sep 2005

i haven't come across this fault on that series of machines yet. like some whirlpool machines the screw you're describing could be to hold a bracket for the tub heater. when you tighten it up again try putting a blob of silicone on it. the next time i'm at one of these i'll have a look.

scottc1978 · 22 Sep 2005

Apparently it's the 'Heater Anchor' which holds the heating element in the middle of the drum. That sound about right?

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Indesit W133s leaks

scottc1978

keithwasherman

scottc1978

DIYnot Local

Similar threads