We have got a new dual fuel cooker, and are going to get it installed by an electrician. We have run some 6mm cable behind our cupboards(to save time), up to the consumer unit, and up through the worktop(both ends are not connected). We have a 45 amp socket(cooker switch(32A), and a normal 13 amp socket) ready to be installed. Now as far as I am aware, can the lead be run from the cooker to the socket, then the wire from the consumer box run to the socket. We have had an electrician come in, and he has said that we need another outlet box for the cooker. Is that correct, or is he trying to con us?
Installation of new cooker - help needed re:electrics
- Thread starter shays47
- Start date
Sponsored Links
He is correct.
And it's not exactly an expensive item at £3.60+VAT it's about the price of a decent pint. Your electrician can probably get it for less.
http://www.tlc-direct.co.uk/Products/MKK5045.html
And it's not exactly an expensive item at £3.60+VAT it's about the price of a decent pint. Your electrician can probably get it for less.
http://www.tlc-direct.co.uk/Products/MKK5045.html
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
