- Joined
- 7 Jul 2015
- Messages
- 56
- Reaction score
- 2
- Country
I bought a slim line LED batten which has two holes for screwing into the ceiling. It also appears to have a pre-broken hole for easier access to connect to the wiring.
Am I correct in thinking that I should be able to remove the circular plate to thread the wires through?
If that is its purpose why did the hole need be covered when the others didn't and it appears to need a lot of force to break it open.
Am I correct in thinking that I should be able to remove the circular plate to thread the wires through?
If that is its purpose why did the hole need be covered when the others didn't and it appears to need a lot of force to break it open.