Isolator Enclosure

[Aragorn84]

Anyone know if you can buy this enclosure on its own:

http://www.tlc-direct.co.uk/Products/WYREC2S.html

I've got a Merlin Gerin 100A switch/isolator and a small din enclosure for it, but the enclosure is crap and that wylex one looks far better, but i'd rather use the switch i have if i can simply buy that enclosure on its own.

I think its listed in the catalogue as ESi2S, but i cant find a pic of that part or anyone selling it online to ensure its the right thing.

 

[Taylortwocities]

http://www.electrium.co.uk/WylexCatalogue2013.pdf page 51

 

[Aragorn84]

Yeh thats what i'd seen, but the pictures dont show the ESi model with the nice meter tail sized cable entries etc.

I've found a pic of the ESi4, which is bigger but the correct style, so i've guessed that the 2 means two modules and the S is slimline.

Cant find anywhere online selling them, i'll maybe just have to pop down to CEF and see how much they are and take a punt on it.

 

[Adam_151]

If the larger physical size is not a problem, then I have used one of these : http://www.toolstation.com/shop/Ele...ts/Enclosure+IP55+3+Module/d190/sd2979/p42692 and drilled holes to suit the tail entries in the right place, in the past

 

[Aragorn84]

While theres no huge limitation on space, i'd prefer to keep it as tidy as possible.

The enclosure i have would be similar in that i'd have to drill holes in it for the cables, and its a bit flimsy.

Its one of these:

http://www.hunters-wholesalers.co.uk/module-enclosure-ip40-h130-aip404-p-63834.html

Maybe once it was screwed to the board and everything was bolted in it would be fine, but the plastics really thin and crappy feeling, and the Wylex one just looks better.

I probably should have just bought the Wylex unit complete from the start, but the first time i looked i only came across the larger REC2 unit rather than REC2S and the REC2 is needlessly bulky as its a 4 module enclosure. Hence buying the Merlin Gerin isolator and small enclosure seperately.