joining new 1 1/2 " waste into a cast external stack

[bigdek]

what the best method to do the above ?

 

[kevplumb]

strapped boss

proper one for cast not plastic

 

[bigdek]

excellent , never new cast ones existed.

will plumbs, pts etc have in stock do you think or will i need to order ?

 

[kevplumb]

plumb centre used to keep them

might have been drainage mind

 

[bigdek]

many thanks i'll get on the case tomorrow

 

[powell30]

Draincenter only......you will need a metal hole saw too.

Last boss i bought wasn't cheap.....40 quid ish if i remember and that was 2 years ago

 

[Steady]

Can't you just run the waste pipe to a gulley or a hopper? That's what most people do.

 

[kirkgas]

"timesaver" branch is the way to go

 

[kevplumb]

"timesaver" branch is the way to go

go on then never come across this

 

[bigdek]

"timesaver" branch is the way to go

do you have a pic.

i hate asking for stuff that i dont know what it looks like.

 

[bigdek]

Can't you just run the waste pipe to a gulley or a hopper? That's what most people do.

i would if it was on the ground floor

 

[glasgowgas]

heres a link




http://www.saint-gobain-pam.co.uk/soildrain/index.cfm?page= Timesaver BS 416-183

 

[kirkgas]

see Glasgow, you are my mate
PS did you get FGA/CO email?

 

[glasgowgas]

see Glasgow, you are my mate
PS did you get FGA/CO email?

checked tonight and it was there!!

must be getting on in years, just like having a bit of paper when trying to explain to a C.O.W exactly why the boilers going off

cheers kirkie

 

[Steady]

i would if it was on the ground floor

Makes no odds. Hopper can go as high up the wall as you want