Hi, just have a query over a 45a switch I was going to swap over today, when I unscrewed it I could see that the load and feed on the neutral side were crossed over, I. E live went to load side but the neutral went to the feed and vise versa, this socket only feeds the igniter to a gas hob, the circuit is connected to my oven and this is connected up properly, when I turn off the fuse in the consumer unit both oven and hob go off, this has been like this for three years that we have lived here!
So question is do I swap the neutral back over so they match, PS it's 10mm cable on both.
Thanks in advance.
So question is do I swap the neutral back over so they match, PS it's 10mm cable on both.
Thanks in advance.