Kitchen sink waste advice
- Thread starter stevenaive
- Start date
Couldn’t find a T with inspection hole at Screwfix but did manage to procure a space gun to drill for the waste pipe.
First I bought the core bit and sds adaptor.
Then went back and bought the pilot drill that didn’t come with the core bit.
Also had to get a comedy length 8mm masonry bit to pre drill from inside. Oh and it knocked off a big chunk of the brick.
Gave up core drilling after about ten minutes as I’d only gone through about half a brick and my arm was falling off.
First I bought the core bit and sds adaptor.
Then went back and bought the pilot drill that didn’t come with the core bit.
Also had to get a comedy length 8mm masonry bit to pre drill from inside. Oh and it knocked off a big chunk of the brick.
Gave up core drilling after about ten minutes as I’d only gone through about half a brick and my arm was falling off.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
