Hi I am going to lay a hardwood block floor ( 4inch X 18 inch ) over approximatly 15 square metres The floor is slightly uneven. I am contemplating making it a floating floor and using a laminate floor underlay It this advisory. Many thanks Bootsie 
laying a floating block hardwood floor on underlay ?
- Thread starter bootsie
- Start date
Sponsored Links
You blocks are too small and too short to install floating.
Level out your underfloor as best as possible, make sure it's dry and fully glue the blocks to the (new) underfloor.
Level out your underfloor as best as possible, make sure it's dry and fully glue the blocks to the (new) underfloor.
thanks for the reply but do I use anything under the blocks at all or just glue straight to the concrete. I also have to rip up some old floor tiles that have been glued down what is the best way to remove these.Many thanx bootsie XX
Sponsored Links
you should lay a smoothing compound over the subfloor and then glue direct to this. ( no underlay etc )
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
