laying glass mosaic wall tiles
- Thread starter billnpat
- Start date
Sponsored Links
I use BAL mosaic fix which is a bright white powdered adhesive so if you get a bit squeeze between the tiles it is less likely to show assuming you are using white grout.
Use a mosaic trowel which will have about a 3mm square notch, any more and you will get it comming through the joints and the tiles wil slump.
Offer the sheet upto the wall and then use the flat of a grout float to gently press them flat and to push the sheet about if it needs positioning.
You don't need spacers, if the adhesive is correctly mixed the sheets will not slide down the wall.
Jason
Use a mosaic trowel which will have about a 3mm square notch, any more and you will get it comming through the joints and the tiles wil slump.
Offer the sheet upto the wall and then use the flat of a grout float to gently press them flat and to push the sheet about if it needs positioning.
You don't need spacers, if the adhesive is correctly mixed the sheets will not slide down the wall.
Jason
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
