Leaky loo.....

[Junior]

Probably a simple one, isolator valve connecting to the plastic screw threaded (Getting technical here, sorry......) bit that goes through the cistern.....is leaking.

Should I use PTFE? it's wierd as it looks like it is trying to compress onto the plastic pipe.......

should there be another seal in place? The whole thing is at a rather dodgy angle which means the joint between the 2 is always under external pressure so I'm concerned it might need bending to line up correctly before trying to stop it leaking........

help!

 

[Al-Glasgow]

Is your 15mm nut connecting directly onto the plastic connector ?.

You should have a tap connector(with fibre washer) in-between the 15mm nut and plastic connector.

Hope that helps

Al