I would like to know if there are any tools or techniques for lifting parquet flooring installed in this manner. I need to lift all the boards (I have long thin parquet boards) to install underfloor heating.
As far as I can tell only the end boards (the ones near the walls) have been nailed down. All the rest are held together with the tongue in groove.
I have tried using a chisel but this seems to damage the parquet (on the edge).
Any advice would be greatly appreciated
As far as I can tell only the end boards (the ones near the walls) have been nailed down. All the rest are held together with the tongue in groove.
I have tried using a chisel but this seems to damage the parquet (on the edge).
Any advice would be greatly appreciated