light fittings

[garyrayne123]

Can anyone suggest a good light fitting which is practicle for use in the t-fall of a roof.

basically on the landing there is no flat section don't really want to locate recessed downlighters as they would be on an angle and the only other option i can think is wall mounted fittings.

Any suggestions please

 

[electronicsuk]

You can get downlights with an adjustable angle, or the good old pendant fitting will find vertical thanks to our old friend gravity

 

[garyrayne123]

You can get downlights with an adjustable angle, or the good old pendant fitting will find vertical thanks to our old friend gravity

I did consider the adjustable down lighters but wasn't sure if they would adjust enough. standard pendants look naff with the ceiling rose on the angle. I had quite a high ceiling level so formed flat section along the landing instead.

 

[sealeon]

you used to be able to get angled batton holders

 

[Taylortwocities]

How about a bar/track light with adjustable spots?

 

[garyrayne123]

cheers for the tips peeps

 

[hairyben]

You can get downlights with an adjustable angle, or the good old pendant fitting will find vertical thanks to our old friend gravity

I did consider the adjustable down lighters but wasn't sure if they would adjust enough. standard pendants look naff with the ceiling rose on the angle. I had quite a high ceiling level so formed flat section along the landing instead.

tilt downlights usually go to about 30 deg, some go more, "wallwasher" downlights come out up to 90 deg.