- Joined
- 5 Jun 2012
- Messages
- 4
- Reaction score
- 0
- Country

Hi,
Just moved into a new property and have one of these boilers installed. I've put the pressure to just over 1 as I've read it needs to be between 1.0 - 2.0. Power is going to the boiler, I've switched it to hot water and heating, it does attempt to fire up but then light goes to red and 01 is displayed. I've tried 3 times now. Is there anything else I can check or do I need to call a engineer?
Water was coming out the hot water tap but now it is not if this helps.
Thanks in advance....
Just moved into a new property and have one of these boilers installed. I've put the pressure to just over 1 as I've read it needs to be between 1.0 - 2.0. Power is going to the boiler, I've switched it to hot water and heating, it does attempt to fire up but then light goes to red and 01 is displayed. I've tried 3 times now. Is there anything else I can check or do I need to call a engineer?
Water was coming out the hot water tap but now it is not if this helps.
Thanks in advance....