Right here goes....I am after having the 2 bulbs in the loft on a switch, they are currently turned on by plugging the flex into a wall socket in a bedroom.
There are 4 light roses in the loft from the bedrooms below.
Here is what I have done so far:
(All earth cables connected everywhere)
From the pull cord switch I have connected blue to L1 and brown to Com.
In loft light rose: Blue from switch connected into the two terminal block.
Brown from switch cable connected into the 3 terminal block.
The other 3 terminal block in rose is empty.
I have put in a junction box into the cable that runs between bedroom 1 and bedroom 2.
When i turn the power on the loft light is on, all the upstairs light work too.....but when I pull the cord on the switch in the loft it trips the upstairs lights.
Please help.......not much more hair to pull out!!!!!!
There are 4 light roses in the loft from the bedrooms below.
Here is what I have done so far:
(All earth cables connected everywhere)
From the pull cord switch I have connected blue to L1 and brown to Com.
In loft light rose: Blue from switch connected into the two terminal block.
Brown from switch cable connected into the 3 terminal block.
The other 3 terminal block in rose is empty.
I have put in a junction box into the cable that runs between bedroom 1 and bedroom 2.
When i turn the power on the loft light is on, all the upstairs light work too.....but when I pull the cord on the switch in the loft it trips the upstairs lights.
Please help.......not much more hair to pull out!!!!!!