Looking for a conduit or pipe clamp

[k0103707]

I need the following part. In the USA its called a conduit hanger but am finding it hard to find the same piece in the UK. I have found a couple of websites here that do mention them but it seems its for bulk buying, I only need a few. I wonder if it goes by a different name over here as I can rarely find them... Here is a link to the part:

B-Line Conduit Hanger for 25mm Conduit

* Conduit hanger * For conduit 25mm diameter * For 7mm diameter threaded rod

www.expresselectrical.co.uk

Anywhere I could get this here besides this website? Is the name of this piece different?

 

[Harry Bloomfield]

Anywhere I could get this here besides this website? Is the name of this piece different?

You can easily make them your self, from 'all round band'. It a thin steel strap, like a series of 8's, with holes punched regularly and is easy to cut, or snap to whatever length you like. It comes galvanised, or black plastic coated, as a roll. Make one to size, then as many more of the same, as you need

 

[matlob]

It's similar to a terry clip or something like the below may work too

Talon Hinged Clip MDPE Black 25-27mm | Toolstation

Black MDPE clips are an ideal solution for fixing MDPE pipe. Made in the UK. Clip has interlocking dovetail to enable multiple parallel pipe runs. Talon hinged clips are supplied in polypropylene and feature a safe operating temperature of 85°C (185°F) for gas and and hot water pipe...

www.toolstation.com

 

[Deleted member 174758]

Builder's band (perforated galvanised steel strip) and a screw. Builders merchants sell it

For conduit, thoigh, I've aleayscused saddles from the plumber's merchants, electrical wholesaler or compressed air machinery supplier

 

[Harry Bloomfield]

Builder's band (perforated galvanised steel strip) and a screw. Builders merchants sell it

The same stuff I suggested - different areas, different names..

 

[foxhole]

SAFE-DCOND25/20 D-Line Safe-D Conduit Clips 25mm Galvanised [Pack of 20] | YESSS Electrical

www.yesss.co.uk

 

[freddiemercurystwin]

If you're not in a hurry: https://www.ebay.co.uk/itm/385183998880?hash=item59aec163a0:g:AscAAOSwArljUh9u

 

[Tigercubrider]

Why not a conduit hanger? The screw hole could have some threaded studding fitted?

 

[333rocky333]

Search " caddy clip" may bring up something suitable

 

[k0103707]

Bingo! Thx buddy! Thank you for your efforts guys!

ERICO, Caddy Pedestal Steel Leg Clamp Support Brackets​

nVent ERICO, Caddy Pedestal Steel Leg Clamp Support Brackets for 19 – 25mm - CD1B

Description NVent Caddy Pedestal Steel Leg Clamp Support Brackets For 19 – 25mm - CD1B Retained bolt and built-in nut means there are less parts to handle or drop Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers Range of pedestal clamps for use with the CAT425WM on...

www.cmwltd.co.uk