I have a 4 year old Mira Event XS and has been working fine. couple of weeks ago it started to make a high pitch noise when working. But the water flowed fine. Now there is no water flow at all, but the motor works.
I took out the filter and found it to be clean and no blocks at all. Wondering if it was water lock I lowered the shower head as low as I could and found a lot of water started to flow (when the shower was turned on). Not with the high pressure as normal but still get enough flow. When I raise the shower head to its normal height the flow stops. So I didn't think it was the airlock.
The temperature mix still seems to work fine when I lower the shower head.
So I'm a bit stumped as to what might be causing the issue.
Any help from you guys is appreciated.
Thanks
I took out the filter and found it to be clean and no blocks at all. Wondering if it was water lock I lowered the shower head as low as I could and found a lot of water started to flow (when the shower was turned on). Not with the high pressure as normal but still get enough flow. When I raise the shower head to its normal height the flow stops. So I didn't think it was the airlock.
The temperature mix still seems to work fine when I lower the shower head.
So I'm a bit stumped as to what might be causing the issue.
Any help from you guys is appreciated.
Thanks