After having had a Santon Premier Plus fitted at my previous home I wanted the same luxury at my new home. I asked my plumber to check the mains pressure and if adequate, to fit the Santon (indirect 250 litre).
My plumber tested the pressure by way of turning the kitchen tap on and off. He decided there was plenty of pressure available and fitted the Santon.
It now transpires there is not enough pressure coming from the mains. it takes 20 mins to run a bath and my long awaited power shower is more like a trickle shower
I have been told the solution is to add a tank to the loft and install a pump.
Questions:
1, Does the pump go before or after the Santon?
2, Do I need twin impellor?
3, Any recomendations on make etc?
2, How big should the tank be?
Many thanks in advance
Trigg
My plumber tested the pressure by way of turning the kitchen tap on and off. He decided there was plenty of pressure available and fitted the Santon.
It now transpires there is not enough pressure coming from the mains. it takes 20 mins to run a bath and my long awaited power shower is more like a trickle shower
I have been told the solution is to add a tank to the loft and install a pump.
Questions:
1, Does the pump go before or after the Santon?
2, Do I need twin impellor?
3, Any recomendations on make etc?
2, How big should the tank be?
Many thanks in advance
Trigg