masking woodwork

Joined
22 Jul 2016
Messages
5,874
Reaction score
1,080
Country
United Kingdom
I masked some double doors, both sides with green frog tape.
15 panes per door, both sides, with crinkly glass.
I applied an undercoat and one top coat of armstead water based silk.

should i remove the masking tape before the top coat or leave it?
I was planning on running a sharp knife along the seam as i peel, or at least having it to hand.

thanks

ps see also my Q about wetting while painting?
 
Sponsored Links
ideally masking should be removed whilst still wet, but obviously that is a right royal pain if you are doing several coats.
If the paint has dried I would cut the tape out as a matter of course as you will almost certainly pull some of the paint off otherwise.
 
Will do-

I may try to remove the masking now and remask , then remove the second masking while wet.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top