Megaflo scale problems - advice required on descale.

[Madrab]

You really shouldn't resurrect an old thread like this, as per the site rules you should start a new one and by all means then link to this one.

The long and the short of it it though, that certainly is the internal bubble baffle breaking down. Yes you could fit a strainer on the outlet of the cylinder with valves either side to service but that's just a fudge and the cylinder will only get worse.

 

[Andrew Heard]

Dear Rob,

Thank you for your guidance regarding the internal bubble baffle. As for your admonishment, I cannot find within the rules any reference to a thread time limit. The last post before mine was December 2021 which isn’t that long ago.

 

[Madrab]

duplicate

 

[Madrab]

Dear Rob,

Thank you for your guidance regarding the internal bubble baffle. As for your admonishment, I cannot find within the rules any reference to a thread time limit. The last post before mine was December 2021 which isn’t that long ago.

Forum rules / General Info

Welcome to DIYNOT Forums :D Please familiarise yourself with the forum rules and enjoy the site!. Please Report any post you feel deserves our attention with the button. There are several moderators but not every unreported post is read. We do read all reports and they are stored. We...

www.diynot.com

Point 8 ....

 

[Andrew Heard]

I beg your pardon, but am I accused of being abusive or unhelpful?

 

[Madrab]

Eh?? Please read the full fist post and not just the bit you can see ... that post details all the site rules/guidelines

Point 8 on the 1st post is -

8 ) Please do not resurrect old threads. Start a new thread if you have a similar query.

No-one has accused anyone of being abusive or unhelpful

 

[Andrew Heard]

Ah, I see your point. I thought the clip was an extract you selected just for me! I shall copy my original and paste it onto a new thread.

 

[dilalio]

Ah, I see your point. I thought the clip was an extract you selected just for me! I shall copy my original and paste it onto a new thread.

And don't be so hasty to take offense.
@Madrab was simply pointing you in the right direction.