Meter tails

[ChrisJ78]

My meter tails are apparently 16mm apparently, and should have been changed to 25mm when the meter was changed at the 19/20 year point.

Should I get Central Networks in to do this, and should it be a free job?

I think it was the meter tails anyway.

 

[Chri5]

The bit between mains head / fuse and the meter is the suppliers issue, yours is the bit from meter / junction (black henly box) beside the meter running to the CU.

The standard is 25mm now, but wasn't back then and the supply may ignore your request since they may say it's adequate for the head fuse which could be 65a

 

[ChrisJ78]

I think it may well be a 65a fuse. No worries on that score then. Thanks for your reply.

 

[GaryMo]

It'll be 60A, not 65A.