Microbore to 15mm

[toshki]

We have microbore running throughout the house, I want to move the bathroom radiator to a different wall. The microbore comes out of the skirting board at the moment. What would be the best way to extend the piping for the new radiator? Keeping in mind that I want it as out of sight as possible.

Could you take the microbore under the floor, increase to 15mm and then up from under the floor to the new radiator position?

Thanks

 

[Terrywookfit]

Yes !

 

[toshki]

Ok, thanks for that. I guess I KNEW that I could do that. What would be best, to extend the run in microbore, extend the run in microbore but change to 15mm close to the new radiator or change as soon as poss to 15mm.

How about extending the microbore around the skirting to the new location, any problems with this?.

I've only done stuff in 15mm/22mm so this microbore is all new to me.

 

[zimmers]

just get microbore and some 10mm speedfit couplings and elbows and 10mm pipe and you can do it nice and easy better under the floor if you can , out the way