Miele G6410SC Seals

[LuthersDad]

A seal on our Miele has gone causing it to leak…and in turn trip the float switch.

The seal is difficult to measure due to perishing but I think ID=50 or 51mm, OD around 55mm and height about 5mm.

it seals the synchronous motor (no parts list number) to the main circulation pump (item 300).

Predictably Miele don’t provide a breakdown to that level so no part number is identified. Seal cost 50p - £5…..new pump £400

Does anyone know the correct dimensions so I can order something to fit?

 

[LuthersDad]

50mm ID 2.5 CSA did not work…..a square/quad seal is required but finding one is proving a challenge

 

[wrigs33]

LuthersDad, did you figure this out? I need to replace exactly the same seal, and I'm having the same challenge finding the part.