I want to fit surface magnetic contact onto an aluminium window in our rented property.
The aluminium frame is about 2mm thick at the point where one of the components need to be fitted.
Screwing it with other than 2mm long screw will mean the sliding pane will not open.
I have considered numerous options, inc silicone, hot melt glue, but these wont stick. I want to eliminate false alarms due to the contacts falling off.
Does anyone have a solution?
Thanks
The aluminium frame is about 2mm thick at the point where one of the components need to be fitted.
Screwing it with other than 2mm long screw will mean the sliding pane will not open.
I have considered numerous options, inc silicone, hot melt glue, but these wont stick. I want to eliminate false alarms due to the contacts falling off.
Does anyone have a solution?
Thanks