My new improved Isolator to CU tails.....

[KingboyD]

Some electrica picture porn for you all

Before.....

After....

Before anyone says, I did move that dubiously placed earth away from the main bus bar!

 

[JohnD]

send me £1 and I will sell you a rubber grommett for that bare metal knockout edge, chafe chafe.

 

[KingboyD]

send me £1 and I will sell you a rubber grommett for that bare metal knockout edge, chafe chafe.

LOL I didnt think it would take long for someone to pick up on that I am going to get 1 soon

 

[Lectrician]

And put a slit in one side like a lazy bugger rather than remove the tails again!

 

[JohnD]

I am going to get 1 soon

Just the one?

 

[KingboyD]

Just the one?

Do I need more?

And put a slit in one side like a lazy b*****r rather than remove the tails again!

Yep.

 

[Pensdown]

...and if you identify the live and neutral tails with a bit of brown & blue phase tape it will be a grand job

 

[KingboyD]

...and if you identify the live and neutral tails with a bit of brown & blue phase tape it will be a grand job

Yeah thats on the to do list

 

[Taylortwocities]

Call me Mr Picky but you appear to have a single 30mA RCD as the incomer. A fault on any circuit will disconnect the whole house.

This is not a good thing as you have a single point of failure.

 

[Pensdown]

Mr Picky, more like Mr Smug

I can't believe I missed that

 

[ban-all-sheds]

1. Is that some exposed conductor I see?

2. Is this where you moved it to, or have you moved it again? It might be an idea to bring the cable into the CU through a compression gland to restrain it, as there's some exposed cpc and possibly enough slack in the cable for it to get pushed further into the CU....