I have a nerve racking NAPIT inspection coming right up and need to show competence in inspection and testing my own work!
I have an old fusebox (that needs totally replacing) and need to use it to perform circuit testing. It can not be isolated as you can see and would seem bad to access doing my R1+R2 tests etc??
Do I ask a mate with a newer property if he wants some new sockets for the inspection... or what? Anybody been though an inspection that can offer advice?
[/img]
TESTS DEAD ARE;
Continuity of protective conductors, including bonding.
Continuity of ring final circuit conductors, including protective devices.
Insulation resistance.
Polarity.
Earth electrode
TESTS ENERGISED ARE;
Re-check polarity.
Earth electrode resistance.
Earth fault loop impedance.
PFC
Functional testing
I have an old fusebox (that needs totally replacing) and need to use it to perform circuit testing. It can not be isolated as you can see and would seem bad to access doing my R1+R2 tests etc??
Do I ask a mate with a newer property if he wants some new sockets for the inspection... or what? Anybody been though an inspection that can offer advice?
TESTS DEAD ARE;
Continuity of protective conductors, including bonding.
Continuity of ring final circuit conductors, including protective devices.
Insulation resistance.
Polarity.
Earth electrode
TESTS ENERGISED ARE;
Re-check polarity.
Earth electrode resistance.
Earth fault loop impedance.
PFC
Functional testing