neceic domestic installer

[goldie_x]

Hi guys,

can anyone give me some good advice on passing the neceic domestic installer test, apart from do it right, lol

 

[DESL]

Ask the NICIEC

Find out who the local assessor is and speak to him

This worked with another body

 

[goldie_x]

Thanks DESL

In which way did it help with another body,
I asked the NICEIC and was told to just do as the inspector asked

not much help,

 

[DavePrior]

Hi Goldie,
Don't know if this is good advice or not, but I got thru my first assessment recently. I'd not long done 2391 Inspection & Test, so was fairly clear on test sequences, methods, expected readings and interpretations of results. In the documentation that the NIC sent, there's a bit that tells you what they're looking for, so I made sure that was all done. (the right books around, certs properly completed etc)
The assessment was not at all what I expected, in that the inspector was a decent bloke who was there to help me pass rather than make me fail. He paid particular attention to my testing methods and interpretation of results (not surprisingly I guess ).
Advice? Read the stuff they send you, have the required literature to hand, know how to test, and how to use the results.
Good luck !!

 

[goldie_x]

Dave prior

Many thanks mate,

I have not done my 2391 as yet, i only have my c&g level 2/3 and me 16th edition,

unfortunately not done much practical work so not had chance to use testing equipment,

thanks for your help

goldie

 

[DESL]

Goldie

I went for full scope with NAPIT and found they were very helpful.

A lot depends on your knowledge and understanding of the principles of testing. I did have the advantage of being a qualified Electrical Engineer and felt I knew as much if not more than the assessor.

 

[goldie_x]

well im sure that was a big help DESL,

i got my test the 9th feb so not much time in getting sorted out,

will just have to read alot and practice

thanks for all help

 

[DESL]

Goldie

What jobs are you using for assessment

Check your records for these EIC MWC etc.

I used a full rewire, CU upgrade for my assessment

Swat up on chapter 7 of the brown book and have your OSG to hand.

Just remember the lower the Zs the bigger the bang

 

[goldie_x]

Desl

Im using a CU replacement/upgrad and a new outside light,

I did have loads of work to choose from but it was all done in an office so they wouldn't except it




MAD