Need advice how to glue back metal strip on tiles

Joined
30 Jul 2013
Messages
96
Reaction score
0
Location
London
Country
United Kingdom
Hi there experts

the metal strip in the picture that runs between the wood floor and the tiles to cover the bottom of the bath has lost most of it’s grip on the tiles.

I’ve also taken a photo of the material originally applied at the back of it for reference.

which adhesive material would you advise to apply to glue it back on please ?

Thank you in advance
 

Attachments

  • D3A65969-981F-4E56-B9A8-1FFA70A1C881.jpeg
    D3A65969-981F-4E56-B9A8-1FFA70A1C881.jpeg
    205.9 KB · Views: 147
  • 21C208D9-86AC-4683-86F7-42FC56BDFF64.jpeg
    21C208D9-86AC-4683-86F7-42FC56BDFF64.jpeg
    433.3 KB · Views: 135
Sponsored Links
Joined
21 Sep 2011
Messages
4,540
Reaction score
1,041
Country
United Kingdom
CT1 or sticks like s*** both work well. I suspect simple bathroom silicone will do though. Tape in place till it sets.
 
Joined
30 Jul 2013
Messages
96
Reaction score
0
Location
London
Country
United Kingdom
Thanks @footprints, while I was waiting for a reply I used old school super glue and surprisingly so far it works :)

I just assumed that since I'm glueing on tiles I should use more "tile friendly" material. If it comes out again then I'll use one of the two you recommended instead.

Thanks for your help !
 
Last edited:
Sponsored Links
Top