need to bridge gap between bottom of wall and new skirting

Status
Not open for further replies.
His DPC question has been answered in his duplicate thread.
 
Sponsored Links
You could mix some sand and cement together (4-1) and pva the wall and throw the muck on to the wall (when pva is tacky) with the top (back) of your trowel every 400mm annd leave it to pick up then hold a piece of wood (2x1 x 36" long) and gently with a sawing action hold it flush to the wall and scread off your muck so it finishes flush with the wall. leave it to firm up them drill thru your skirting into your "screeds" then take away your skirting and put a masonry drill into the holes in your screeds and drill into the brickwork and insert brown plugs and then fit skirting, screw it in and the screeds will hold it flush to the wall. Fill in above skirting as necessary.. Good Luck. ;)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Status
Not open for further replies.
Sponsored Links
Back
Top