Pretty simple, if you get one in a frame it's a case of squaring it up, getting your gaps between the door and frame equal, fixing to the wall with right angle brackets, then pull the locking pin out and away you go
Very easy, Lots of videos online and they come with instructions.
Just be very careful on the measuring and ordering, Alot of sites only give the door size and you have to add on the frame size and the 5-10mm gap all around it.
How is yours broken? they can be quite easy to repair too
Very easy, Lots of videos online and they come with instructions.
Just be very careful on the measuring and ordering, Alot of sites only give the door size and you have to add on the frame size and the 5-10mm gap all around it.
How is yours broken? they can be quite easy to repair too
I have a gap 2270 wide and height about 2040.
The door with frame is 2245 wide and 2040 high( I check again )
Will that be enough clearance or do I need wood to secure it in on sides .
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local