new pump, but not getting hot water to circulate to radiator

Hiya, any help appreciated, old pump burnt out, so replaced with new grundfos! whole system drained and bled, but hot water still wont circulate to radiators, bathroom radiator closest to boiler get's slightly warm and that's it, arrrghh! help a lady in distress, it's doing my bonce in..

 

Clear the air properly.

I presume you replaced the pump valves if you drained the system?

If you did, are they open fully?

Dave

 

switch off heating system. now fill and vent all your radiators including hot water cylinder (if fitted). on your new grundfoss pump remove the vent plug (on the face where the writing is) when water dribbles out place a cloth to catch and replace vent plug. if you dont vent the pump it can air lock very easily. now try running your system

 

Thanks guys, will see what happens, return flow seems wrong, there's gotta be air somewhere, sounds like it might end up being a hosepipe flush job!! Will keep you posted!

 

the pump is of course the right way round

 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Please select a service and enter a location to continue...

Plumber / Gas Engineer Electrician Builder Decorator Builders' Merchant Plumbers' Merchant Tile Supplier Flooring Supplier
Start Search

Are you a trade or supplier? You can create your listing free at DIYnot Local