Not standard fuses I can just flip?

I'm replacing the CU, even if it's a simple fix, it might not be next time, it's irritating and the current one is what 30-50 years old with a bit of rejigging?
 
I
flipping the big main switch won't reset anything on those mate, they're old-school fuse carriers with wire inside that burns through when there's a fault. you'll need to turn the main switch off first before touching anything, then pull the lighting carrier out to inspect the wire. 9 times out of 10 with lights it's just a blown bulb that popped the 5 amp fuse wire, but definitely make sure the power is isolated at the main switch before you pull it.
before the CU is changed, I'm debating changing the wire myself, just worried with something this old, it still won't safely isolate or something.
 
I

before the CU is changed, I'm debating changing the wire myself, just worried with something this old, it still won't safely isolate or something.
Turn off the main switch, pull the fuse and fit a piece of 5 amp fuse wire.

See if it now works.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top