I live in a VERY hard water area and took my shower apart to clean the heater element.
I put it all back and its leaking on the inlet and stabilising valve. I suspect the O Rings being moved is not sealing properly so I will get some new ones however do not know the size to get. Are they 15mm? If not can you let me know what size and where to get them from, I assume B&Q is good enough?
Thanks
I put it all back and its leaking on the inlet and stabilising valve. I suspect the O Rings being moved is not sealing properly so I will get some new ones however do not know the size to get. Are they 15mm? If not can you let me know what size and where to get them from, I assume B&Q is good enough?
Thanks