My sincere apologies, if anything like this has been posted already, but I have had a good dig around and can't quite see an answer.
I have a first floor radiator, which I have bled because it is cold at the top. A little air comes out, then nothing. Even opening the valve further makes no difference and the rad stays cold at the top. Pressure is sitting at 1 bar.
Thanks in anticipation.
R0b1n
I have a first floor radiator, which I have bled because it is cold at the top. A little air comes out, then nothing. Even opening the valve further makes no difference and the rad stays cold at the top. Pressure is sitting at 1 bar.
Thanks in anticipation.
R0b1n