- Joined
- 5 Aug 2016
- Messages
- 7
- Reaction score
- 0
- Country
Hi
I'm looking to replace my Optima XM alarm panel with a newer one and have been mapping out the existing wires. Everything maps out good, I can see the tamper circuit in place but I have some shock sensors which seem to be wired to a little black box within the Optima XM which doesn't appear to be on the Engineers Manual.
Can anybody tell me what it is. It gets power from the 13V connection on the main panel. I can see red and black wire coming into it from zone 3 on the main panel and two other wires seem to create a loop via the shock sensor cables.
I have uploaded a couple of photos, if anyone can identify what its I'd be extremely grateful.
Also, will I need to put this box in my new alarm panel?
Cheers
MerseysideMorph
I'm looking to replace my Optima XM alarm panel with a newer one and have been mapping out the existing wires. Everything maps out good, I can see the tamper circuit in place but I have some shock sensors which seem to be wired to a little black box within the Optima XM which doesn't appear to be on the Engineers Manual.
Can anybody tell me what it is. It gets power from the 13V connection on the main panel. I can see red and black wire coming into it from zone 3 on the main panel and two other wires seem to create a loop via the shock sensor cables.
I have uploaded a couple of photos, if anyone can identify what its I'd be extremely grateful.
Also, will I need to put this box in my new alarm panel?
Cheers
MerseysideMorph