Id like to attempt to paint the front of my house (windows, fascias etc) as I have some free time in my hands soon.
Some of the existing paint on the wooden window frames is peeling and looking shabby. Would I be doing it correctly if I do the following...
1) Scrape/burn off the flaking gloss back to bare timber.
2) Prime, sand down to smooth finish, undercoat and then gloss
Will the bare wood really need priming, or can I just undercoat and then gloss?
Some of the existing paint on the wooden window frames is peeling and looking shabby. Would I be doing it correctly if I do the following...
1) Scrape/burn off the flaking gloss back to bare timber.
2) Prime, sand down to smooth finish, undercoat and then gloss
Will the bare wood really need priming, or can I just undercoat and then gloss?