passing water

[clf-gas]

My mate is round and talking about a unvented cylinder Ackolade, (may be spelt wrong). Any how after 20mins of running water passing through tundish, Any Ideas to go with our theoris

Come on Dave

 

[corgiman]

Thats an gledhill accolade

and I dont understand what you are saying but here is the tech manual


http://www.gledhill.net/pdfmanuals/A Class Range/AccEst-Iss5.pdf

 

[gas4you]

How about the expansion vessel knackered? Or maybe just the prv knackered?

 

[corgiman]

did you understand the question dave???

 

[gas4you]

Obviously not then What have I missed

 

[corgiman]

I keep reading it still dont understand

does the water stop after twenty minutes or not

who knows

 

[clf-gas]

Welldone MatT
Welldone Dave

MY diagnosis was the EV was Knackered, and /or the PRV knackered.

Said he has recharged the EV but had'nt checked if valve was passing water. That was a few weeks ago and cylinder is now passing water through tundish again. One knackered EV.

He's going to change EV, so surgested he drains and checks PRV and temp rv.

 

[gas4you]

If I remember my unvented course correctly the only person who can change a built in safety device on an unvented cylinder is the manufacturers or their agents according to G3 regs. Am I correct

 

[corgiman]

If I remember my unvented course correctly the only person who can change a built in safety device on an unvented cylinder is the manufacturers or their agents according to G3 regs. Am I correct

No anyone with G3 should do it, not nescessary to have the sanction of the makers