Pillar tap unions.

[mcec]

Hi all. My first posting so be gentle.
I have recently purchased a bath/shower mixer that contains 180mm centre rear pipe outlets. They usually have 150mm centre outlets and then you fit some cranked pillar unions to allow the taps to fit the standard 180mm centre bath tap holes.
So my question is: can you buy chrome straight pillar unions that will allow 180mm centre rear tap outlets connect to 180mm standard bath hole centres?

 

[crockett]

Could you post a pic of your current taps ? Not quite sure what you require

 

[mcec]

These are the standard unions that are slightly offset to convert 180mm centres to 150mm centres. I need straight ones to allow 180mm centres to 180mm centres. Hope this makes sense.

 

[mcec]

Sorry, didn't include a picture of my taps that you asked for so here they are.

Untitled

• mcec
• 19 Sep 2010
• 1

 

[mcec]

And these are the unions.

Untitled

• mcec
• 19 Sep 2010
• 1

 

[crockett]

http://www.dreambathroomsuk.co.uk/T...ons-180mm-x-70-mm/prod_1169.html?review=write

Don't know if this will help or not

 

[mcec]

Unfortunately these are the standard offset ones that convert the centres from 180mm at the bath to 150mm at the tap. I will have to return the tap and purchase an alternative. Many thanks for trying.