dont know why he dident go down to the ground if thats what you wanted you can custom the skirting cut it so it goes over the floor (hearth) so it goes right up to the edge and return the edges i think that will look ok also
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Plaster To Floor
- Thread starter the_big_1
- Start date
Just not sure about the raw edge of the skirting above the hart, it will be open ended wood.
If I filled the plaster gap with render, cement mix with water proof and a light skim or straight to skim, 2mm from floor then silicone, would tht be ok?
If I filled the plaster gap with render, cement mix with water proof and a light skim or straight to skim, 2mm from floor then silicone, would tht be ok?
mmkIt won't be a raw edge you will be returning it you mitre the edge then saw a piece off another bit of skirting and put it on the end like you do with coving
arrrrrr so what your saying is put a piece at 90 degrees, like its going in to the wall?
No you mitre then insert another piece of skirting google how to return coving or skirting
Hi,
Yeah I see what you mean, will give it a go!
Many Thanks!!!
Yeah I see what you mean, will give it a go!
Many Thanks!!!
Show us a PIC of what it looks like when its done
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
