First time plasterboarding (dot & dab) a small area.
Should i dot & dab the widow reveals first and leave the required overhang so that the wall boards meet flush?
The overhand would be 12.5mm + 10mm dab = 22.5mm (25mm)
First time plasterboarding (dot & dab) a small area.
Should i dot & dab the widow reveals first and leave the required overhang so that the wall boards meet flush?
The overhand would be 12.5mm + 10mm dab = 22.5mm (25mm)
We tend to do the walls first as these give a better indication of the reveal depth, once you have accounted for socket or pipe drops. We let the plasterboard creep past the masonry reveal upright by about 8mm or so. This means the reveal board sits tight against it.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local