Please Help - GlowWorm Betacom 30c has low pressure.

[rms123]

Hi Forum,

This is my first post, I have read through several posts, threads. I bled one of the rads (as it was not heating up) without realizing that it would drop the pressure to a point where boiler would simply fail to work. I cannot find a filling loop (no chrome braided pipe anywhere to be seen). I have attached a photo of the underside of the boiler showing the pipework. I have a 4 month old baby and a tenant. At best I am looking at a week before someone will come over to have a look. Please help me fix this issue.

I have also attached behind the panel photo in case if it helps.

Many Thanks
RMS

 

[PrenticeBoyofDerry]

It will be the two blue valves that need to be opened to re-pressurise.
Read the section indicated below for full details from the link.
Section 11 Commissioning (page 38)
http://www.glow-worm.co.uk/glow-worm/betacom-c-july-09-157123.pdf

 

[denso13]

The blue valves are for isolation. You should have a filling loop somewhere close to the boiler (usually)

 

[rms123]

Many thanks for your responses PrenticeBoyofDerry and denso13. I did manage to find the braided chrome pipe tucked behind the kitchen shelf ( I am in a let property and have since put a note to indicate where it is so that future tenants can benefit).

Thanks again.