I had my central heating pump replaced a couple of weeks ago. A few days later I noticed that our hot water in the kitchen and bathroom was flowing slowly. The central heating seems to be the same as before and the boiler feeds the central heating and hot water. I have checked as far as I can all the valves. I live in an old building, top floor and it is a standard boiler. Sorry for being non technical but any help or guidance would be apprecitred.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
poor hot water flow
- Thread starter poppaz
- Start date
Can't see why ch pump change would affect h/w pressure unless plumber turned off gate valve to h/w cylinder for some unknown reason and hasn't turned it back on properly. These can often seem as though they are turning/fully open but are actually stuck inside!
Try investigating this and replacing gate valve first.
Try investigating this and replacing gate valve first.
Sounds like one of those..
Since you replaced my taps the door wont shut properly
Seriously, as said make sure gate valve (cold feed to cylinder) is on properly.
Since you replaced my taps the door wont shut properly
Seriously, as said make sure gate valve (cold feed to cylinder) is on properly.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local