Potter ton Profile e60 boiler

[Callis81]

Hi there,

My first post - Hopefully someone can help.

Some of my radiators were half hot, half cold so I bleed them. They started getting hit all over as expected. However when I got upstairs the pressure seemed to stop and I don't water or air now.

I went back to the boiler and now it won't ingite.

I've checked the tank in the loft and it's fine. Any ideas?

Thanks,

Richard.

 

[Rob]

If you're not getting any air or water from rads but the tanks full then it's likely that you've got a blocked cold feed.

 

[Callis81]

Ok - thanks Rob.

What can I do to unblock it?

 

[picasso]

And the overheat stat has probably popped, I think its on the bottom of the boiler on the profile.

 

[Rob]

Cut it out! Not a job I'd recommend to a complete novice so maybe call someone out.

As Picasso said, the reason it's probably stopped working is it's overheated. You could try and reset it but not much point if there's a lack of water in the system.

 

[45yearsagasman]

You've probably got a blocked cold feed where it connects to your system pipework as said.View media item 55283This might help to id the area to be investigated.