potterton kingfisher MF not igniting

[jonCar]

HI,
just as colder weather has come starting to have a problem with our boiler, Potterton Kingfisher MF.
Basically it wont ignite. When it's turned on it just keeps clicking but no ignition.
Feels like there is pump operation and i have tried differant settings.
The spark is constant and visible through the viewer.
Any help much appriciated.

 

[jackthom]

Hi, if the fan isn't running have a look at fuse F1 to start with.

 

[jonCar]

hi,
sorry forgot to say- fan is running fine....
thanks

 

[jackthom]

Sorry, unless anyone else here has any suggestions it looks like you'll have to get someone out to take a look at the pilot light valve.

http://www.acwilgar.co.uk/Boiler-Ma...terton_Kingfisher_MF CFL 40-100_Install 7.pdf

There's a fault finding flow chart in the manual and you're near the top of page 34 in column A.

 

[jonCar]

Thanks for your help.
Got gas man out....
The injector was blocked.........all sorted, warm house + hot water phew!

 

[Agile]

Hi, if the fan isn't running have a look at fuse F1 to start with.

If the fan is not running then it will not be sparking!