New bathroom inlcuding heated towel rail and power shower completed today. Plumber didn't touch the boiler, but switched electrics of at the spur.Trying to restart it the fan comes on, but there's no ignition, circulation pump also works OK. The small fuse on the board is also OK. Any ideas?
Potterton Netaheat 10/16 puzzle
- Thread starter docrussell
- Start date
S
Soggy_weetabix
System fully refilled and vented by plumber I assume?
If boiler fault....
Fan (although running, is worn)
Pressure switch (or p/s tubes, or blocked brass restrictor in p/s tube.)
Electrically these boilers work differently than most others, and fault finding can be difficult for engineers who have little experience of this boiler.
David
If boiler fault....
Fan (although running, is worn)
Pressure switch (or p/s tubes, or blocked brass restrictor in p/s tube.)
Electrically these boilers work differently than most others, and fault finding can be difficult for engineers who have little experience of this boiler.
David
Thanks David, Rads and boiler vented no apparent airlocks
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local