Hi all, having major problems with my recently installed power shower. Ever since it was installed, the pump would sound like it was kettling, in the pump. Have had plumber round who increased the size of the inlet from 15mm to 22mm. The pump is located close to the cylinder.
Any ideas what I can do next. The pipe work from the top of the cyclinder, is elbowed, in 22mm copper and is T'eed with the pump inlet attached.
Any ideas what I should look for next. Cyclinder stat is turned to 50 deg.
Many thanks
Any ideas what I can do next. The pipe work from the top of the cyclinder, is elbowed, in 22mm copper and is T'eed with the pump inlet attached.
Any ideas what I should look for next. Cyclinder stat is turned to 50 deg.
Many thanks