1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Premier Elite Power Down

Discussion in 'Alarms, CCTV & Telephones' started by HaccasDave, 12 May 2020.

  1. HaccasDave

    HaccasDave

    Joined:
    12 May 2020
    Messages:
    2
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi,

    Just when I thought I knew what I was doing to add SmartCom to my Premier Elite 24...

    I need to power off my Premier Elite 24 (to upgrade to latest F/w so I can add the SmartCom. However, when I cut the AC and disconnect the battery (as per the instructions) the external sounder goes off. I can't clear the alarm - because the panel and keypads are dead.

    Is there a way to switch off the power without waking up the neighbours?

    Thanks.
     
  2. sparkymarka

    sparkymarka

    Joined:
    16 Feb 2011
    Messages:
    7,760
    Thanks Received:
    1,190
    Location:
    Sheffield
    Country:
    United Kingdom
    Errr that the idea....to stop a burglar just disabling your alarm ! Anyway depends on what bellbox you have ...Or connect the bell + and - to your battery while you flash your panel ....
    What firmware is it ?
     
  3. Sponsored Links
  4. secureiam

    secureiam

    Joined:
    20 Jun 2014
    Messages:
    4,167
    Thanks Received:
    501
    Location:
    Lancashire
    Country:
    United Kingdom
    don't need to power down to upgrade it
     
  5. HaccasDave

    HaccasDave

    Joined:
    12 May 2020
    Messages:
    2
    Thanks Received:
    0
    Country:
    United Kingdom
    OK. Thanks. Manual says power panel down before connecting flasher then power it back on. I guess they are just being cautious. Worked OK just plugging in while powered on.

    SmartCom now connected. Now just to to get Connect (& Wintex) going.

    Thanks for the help.
     
  6. Sponsored Links
Loading...

Share This Page