I want a new floor covering for my kitchen which presently has tiles. I have decided on the 5mm LVTs which means the tiles need to come up. I will carry out the preparation by removing a radiator, skirting board, appliances and some of the single cupboards. There are two roughly L shaped runs of cupboards with worktop on diagonally opposite sides of the kitchen that I don't want to remove but these sit on top of the tiles.. However the person who will be taking the tiles up/screeding and the one who will be laying the tiles tell me they need the vertical ends of each end cupboard removing so the LVTs can go beneath them.
The only way I can see, is to buy adjustable feet to fit beneath each cupboard so I can remove the end board. I will also have to fit temporary props to support the worktop while the work is done. Eventually I would fit new end boards anyway as the colour is not what I want.
I would be interested to hear if anyone else has had this issue and if they have any advice.
TIA
The only way I can see, is to buy adjustable feet to fit beneath each cupboard so I can remove the end board. I will also have to fit temporary props to support the worktop while the work is done. Eventually I would fit new end boards anyway as the colour is not what I want.
I would be interested to hear if anyone else has had this issue and if they have any advice.
TIA