- Joined
- 17 Apr 2007
- Messages
- 2,553
- Reaction score
- 129
- Country
I fitted isolator valves to the mixer shower I installed, the pipework being JG 15mm pushfit.
I used ptfe on the olive connections but the output for the HW is a problem. Its starting leaking twice so each time I applied fresh ptfe. The olive is nipped on the pipe but I can spin the olive. I’ve done the connection again and have notice a very slow drip, three drops of water over 24 hours.
I did fit JG inserts to the pipe ends.
I used ptfe on the olive connections but the output for the HW is a problem. Its starting leaking twice so each time I applied fresh ptfe. The olive is nipped on the pipe but I can spin the olive. I’ve done the connection again and have notice a very slow drip, three drops of water over 24 hours.
I did fit JG inserts to the pipe ends.