What is the purpose of the flue sensing nipple on ideal boilers? Is it to test the flue discharge? I know you need to be gas safe to carrying out this kind of work was just intersted on its purpose.
Purpose of the flue sensing nipple on ideal boilers?
- Thread starter Fredstudio
- Start date
Sponsored Links
Does the nut need to be kept tight on it then
no , just finger tight is fine , i work on ideal boilers all day , pain when people make them tight with a spanner , new ideal models such the logic have a larger plastic nut now
Sponsored Links
Does finger tight seal the joint then?
slightly more than finger tight , doesnt need to be very tight as the pressure that the gasses are at are very small, easy to test if its leaking as you will feel warm air on your hand when placed near it when boiler is running if you are worried about it, as previously stated it is there to enable your service engineer to measure how your boiler is performing it has no user function whatsoever so you would never need to touch it
Of course that implies that with it being an Ideal boiler it is working in the first place.
And not waiting for smeghead to rock up with a van load of parts
And not waiting for smeghead to rock up with a van load of parts
G
gaswizzard
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
