- Joined
- 12 Dec 2016
- Messages
- 448
- Reaction score
- 3
- Country
Is it easy and are there any dangers? Is guess drill in then make as accurate as u can cut with a jigsaw?
In the blank panel you mean? Easy - but don't make the hole too small as its difficult to enlarge by a few mm if you have to.
Just cut it the right size, drill a hole and use a jigsaw. Just be wary that the blade can sometimes bend a bit meaning the opposite side to the one you're on can be a bit off if you're not careful. I'm sure someone with even limited diy skills could tackle it. £180 is nuts.
I stuck the template to the door, drilled a hole then cut with a pad saw. It cuts very easily.
The pvc won't crack and split?
Will a jigsaw do it?
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local